Recently, Baidu released the latest product Baidu Eye, a move aimed at calling Google and responding positively to its Google glass. I believe that the competition between the giants will accelerate the outbreak of the intelligent hardware war.
On the other hand, for engineering developers, the design of intelligent hardware products is inseparable from an excellent development platform. However, the development boards on the market are not well matched, and it is difficult for engineers to find a diversified platform.
The CooCox tool is a free, shared development platform with the slogan "Let embedded intelligent hardware development be as simple as building blocks." Infineon combines tools, development kits and software code perfectly, so in embedded systems, hardware and software are used just like building blocks. Sure enough, this set of tools has sparked a heated discussion among designers in the circle. We have selected some of these models and shared them with the netizens. We look forward to bringing you some inspiration and inspiration.
Is the CooCox development board compatible with the Raspberry Pi, how to get started quickly?
The main chip of this development board uses the STM32F103RB chip, which provides a pin interface that can be connected to the Raspberry Pi. It supports both the direct and indirect control modes of the Raspberry Pi, and can also run independently from the Raspberry Pi. The development board is also compatible with ArduinoTM, so you can take many hardware expansion boards on the market. Therefore, you should be familiar with the common hardware modules on the market in addition to the software components provided by CoIDE when using the development board. Build the required system prototype.
What are the advantages of developing with the CooCox tool Embedded Pi?
This development board can reuse a large number of Arduino hardware, and these hardware drivers are available on CoIDE. CooCox CoIDE is a complete integrated development environment for ARM Cortex M series developers, including engineering management, editing, compilation tools, debuggers and a communication platform where developers can share their own code and ideas. In addition, CoIDE is also available for free, component-based, real-time sharing, tick-out, and support for a variety of debuggers, including CMSIS-DAP, J-Link, CoLinkEx, ST-Link, and more. Although the STM32F103RB is not a chip featuring low power consumption, it supports sleep mode, software control switch peripherals, etc., so software control can achieve low power consumption, which is a quality product for learning and project use.
How does CooCox make software development easy?
In terms of software, CooCox advocates component development, and all drivers, algorithms, protocols, etc. can be taken. The new version of CoIDE will also be highlighted in the component development, which is convenient for users to create and share components, and support component version management and code collaborative development. This approach is easier and more efficient in software development.
What is the use of Embedded Pi? - Create the world with Embedded Pi.
With the different jumper settings on the Embedded Pi, you can choose between the following three operating modes: 1.STM32/SCM mode as an ArduinoTM compatible motherboard; 2.ST-Adapter mode, compatible as an ArduinoTM form factor The motherboard uses Raspberry Pi as the graphical user interface; 3.Raspberry Pi mode as a hardware bridge between Raspberry Pi and ArduinoTM shields. In short, the CooCox tool can meet the design of all intelligent hardware, including smart home products.
In this era of intelligent hardware, the CooCox brings us not only surprises, but more importantly, it makes the development of intelligent hardware with simple building blocks become a reality, and strives for designers to gain a place in the intelligent hardware war.
Everyone is welcome to continue to participate in the discussion and the prizes are rich. How to make embedded intelligent hardware development as simple as building blocks?
- Electronic enthusiast network original, reproduced please indicate the source!
Rubber cable is also rubber sheathed cable. As its name implies, it is a wire and cable with various rubbers or thermosetting elastomers with equivalent performance as the insulation and sheath foundation.
Because of its unique flexibility, rubber sheathed cables are very suitable for use in indoor and outdoor environments, including wet and even water conditions. They are usually used on mobile electrical equipment. They are suitable for electrical and pneumatic connection or wiring with AC rated voltage of 300V/500V and 450V/750V below.
Rubber sheathed cables are used by products in many fields due to their unique mechanical and physical properties, so they are classified into many categories, such as mobile universal rubber sheathed cables, electric welding machines, electric power, marine, mining, wind energy, nuclear energy, etc., among which mobile universal rubber sheathed cables and mining cables are widely used.
Advantages
1. Good water resistance, less air permeability.2. It can be mixed with other rubber or plastics to improve the performance of rubber.
3. Good heat resistance. The heat resistance of rubber is better than that of natural rubber and styrene butadiene rubber.
4. The physical and mechanical properties are average. The mechanical properties of rubber without reinforcing agent are poor.
5. It has excellent oil resistance and solvent resistance. The higher the content of acrylonitrile, the better the oil resistance.
Rubber Cable,Rubber Welding Cable,Outdoor Copper Wire Rubber Cable,Flexible Rubber Sheathed Cable
Ruitian Cable CO.,LTD. , https://www.rtpowercable.com