Elliptical Flow Meter Product Features
1. The rotation of the elliptical gear is driven by the indenters of the measured medium.
2. The higher the viscosity of the medium, the smaller the leakage from the gear and the metering gap. Hence, the greater the stickiness of the medium, the smaller the leakage error, resulting in more accurate measurements.
3. It’s ideal for measuring high-viscosity media flows but isn’t suitable for fluids containing solid particles (solid particles can jam the gears, making measurement impossible). If the liquid being tested contains gas, it may lead to measurement inaccuracies.
Waist Wheel Flow Meter Product Features
1. Lightweight, highly precise, and easy to install and operate.
2. Minimal pressure drop and a wide range.
3. Widely used in sectors like petrochemicals, electricity, metallurgy, transportation, defense, and trade for measuring gasoline, kerosene, and light diesel oils.
Dual Rotor Flow Meter Features
1. Suitable for thin oils, light oils, heavy oils, crude oils with high sand and water content. The liquid being measured has high viscosity.
2. Large flow rates for liquids passing through the meter.
3. Long service life, high accuracy, and reliability.
4. Minimal internal pressure loss.
5. Can be directly networked with your computer.
Orifice Flow Meter Product Features
1. The throttling device structure is simple, sturdy, performs reliably, lasts long, and is cost-effective.
2. Widely applicable; all single-phase flows can be measured, and some mixed-phase flows are also compatible.
3. Standard throttling devices can be used without real-flow calibration.
4. Integrated orifice plates are easier to install, requiring no pressure pipes and can be directly connected to differential pressure transmitters and pressure transmitters.
Rotor Flow Meter Product Features
1. Commonly used in industries and laboratories.
2. Simple and intuitive design, low pressure loss, and easy maintenance.
3. Must be installed on a vertical pipe section, with the fluid medium flowing upward through the rotameter.
Turbine Flow Meter Features
1. Excellent anti-contamination capability.
2. Strong resistance to electromagnetic interference and vibration.
3. Simple structure and easy maintenance.
4. Almost no pressure loss, saving power and reducing energy consumption.
Electromagnetic Flow Meter Product Features
1. Two-way measurement system.
2. Requires a straight pipe length equal to five times the pipe diameter.
3. Low-pressure loss.
4. Measurement unaffected by changes in fluid density, viscosity, temperature, pressure, or conductivity.
5. Primarily used in sewage treatment.
Vortex Flow Meter Product Features
1. Simple yet robust structure, no moving parts, high reliability, and long-term stable operation.
2. Easy installation and maintenance.
3. The detection sensor doesn’t come into direct contact with the medium, ensuring consistent performance and a long lifespan.
4. Outputs a pulse signal proportional to the flow rate, with no zero drift and high precision.
5. Wide measurement range with a range ratio of 1:10.
6. Minimal pressure loss, low operating costs, and energy-efficient.
Mass Flow Meter Product Features
1. No mechanical transmission components, compact size, lightweight, and easy maintenance.
2. High precision.
3. No moving parts inside, ensuring excellent stability.
4. Wide range ratio, outperforming many traditional instruments.
Target Flow Meter Product Features
1. Solid construction with no moving parts, featuring a plug-and-play design for easy disassembly.
2. On-site dry calibration using the weight-hanging method.
3. Integrated temperature and pressure compensation, allowing direct output of mass or standard volume.
4. The target plate can be replaced as needed to adjust the range.
5. Strong anti-vibration capability, capable of measuring pulsating flows within a specific range.
Source: 10 Major Flow Meter Dynamic Schematics and Features
**Click here for more motor control design information**
Main Picture:
The hydrogel Screen Protector has super ductility and shrinkage, has a strong and effective self-repair function, impact resistance, durability, better toughness, and has a certain buffering effect on sharp objects. The use of hydrogel film can adapt to the contours of any device, so it can be attached to curved screens and rounded edges. The full-coverage screen protector can perfectly fit your screen and provide maximum protection.
The 0.14mm ultra-thin thickness is more sensitive to the touch, and the ultra-thin design gives you a bare-metal experience. The oleophobic and waterproof coating prevents fingerprints and dust, makes the hydrogel screen protector easy to clean, and makes your phone look more beautiful.
Hd Clear Hydrogel Protector Sheet,Anti Blue-Ray Hydrogel Protector,Matte Hydrogel Film,Privacy Hydrogel Film
Shenzhen TUOLI Electronic Technology Co., Ltd. , https://www.tlhydrogelprotector.com