12/15 update:
First, soft brush machine:
Many friends report that they cannot enter the one-touch flashing state because the original firmware does not support it individually and can be implemented by other methods.
The following is a list of other great gods for your reference:
1. Upload and install the computer on the computer to install the default path, because you need to use the installation path when you enter the command below.
2. Turn on Zhuo Master Brush Expert on the computer and now display the device is not connected; win key + r key at the same time open the run dialog box input cmd call up the command prompt window; open Zhuo master Brush expert installation folder, copy the file path Down, this example is in Crogram Fileszhuods
3, then enter the command "CD Crogram Fileszhuods" in the command prompt window, into the installation directory of Zhuo master brushing experts.
4, continue to enter the "adb connect" + box IP address (my 192.168.1.5) in the command prompt window, do not close the prompt window, turn off the master Zhuo expert brush and then open, you can see that the phone is being connected A few seconds later the connection was successful.
5, click on Zhuo master Recovety, will restart the TV box and enter Recovety mode, this time with the same phone brush firmware. I will not repeat here.
Second, hard brush machine:
After many experiments, Jieke R1 Ali version finally successfully brushed into Android mandatory upgrade. This upgrade mode is valid only for TF cards.
Step 1: Extract the software to be upgraded on the computer and copy the unzipped files g18ref-ota-20131203.zip, recovery.img, uboot.bin, factory_update_param.aml, and ethmac.flash to the TF card root directory.
Step 2: Unplug the product, insert the TF card, press and hold the power button on the front panel of the product, plug in the product power, wait about 20 seconds, after the system prompts to start the automatic upgrade, please release and hold the power button finger;
Step 3: During the upgrade, please do not pull out the TF card or turn off the power. After the system is upgraded, it will be restored to the factory state. The previously installed APK will not be retained.
Download address: http://bbs.shafa.com/thread-1276124-1-1.html
First, soft brush machine:
Many friends report that they cannot enter the one-touch flashing state because the original firmware does not support it individually and can be implemented by other methods.
The following is a list of other great gods for your reference:
1. Upload and install the computer on the computer to install the default path, because you need to use the installation path when you enter the command below.
2. Turn on Zhuo Master Brush Expert on the computer and now display the device is not connected; win key + r key at the same time open the run dialog box input cmd call up the command prompt window; open Zhuo master Brush expert installation folder, copy the file path Down, this example is in Crogram Fileszhuods
3, then enter the command "CD Crogram Fileszhuods" in the command prompt window, into the installation directory of Zhuo master brushing experts.
4, continue to enter the "adb connect" + box IP address (my 192.168.1.5) in the command prompt window, do not close the prompt window, turn off the master Zhuo expert brush and then open, you can see that the phone is being connected A few seconds later the connection was successful.
5, click on Zhuo master Recovety, will restart the TV box and enter Recovety mode, this time with the same phone brush firmware. I will not repeat here.
Second, hard brush machine:
After many experiments, Jieke R1 Ali version finally successfully brushed into Android mandatory upgrade. This upgrade mode is valid only for TF cards.
Step 1: Extract the software to be upgraded on the computer and copy the unzipped files g18ref-ota-20131203.zip, recovery.img, uboot.bin, factory_update_param.aml, and ethmac.flash to the TF card root directory.
Step 2: Unplug the product, insert the TF card, press and hold the power button on the front panel of the product, plug in the product power, wait about 20 seconds, after the system prompts to start the automatic upgrade, please release and hold the power button finger;
Step 3: During the upgrade, please do not pull out the TF card or turn off the power. After the system is upgraded, it will be restored to the factory state. The previously installed APK will not be retained.
Download address: http://bbs.shafa.com/thread-1276124-1-1.html