1. NXP GreenChip Intelligent Lighting Solution
NXP's GreenChip intelligent lighting solutions offer a new form of lighting control and energy management with compact IP and low cost, wireless IP connectivity, energy-efficient lighting and low standby power consumption (currently 150mW, planned to be reduced to 50mW).
Lamp driver: CFL, SSL, HF-TL, HID
Wireless microcontroller: JN5148 Wireless microcontroller JenNet-IP or ZigBee network stack
Smart supply: TEA1721AT, TEA1721BT, TEA1721DT, TEA1721FT
Main features and advantages
1. Flexible, easy to expand and affordable software solutions
2. Highly secure IP intelligent lighting system with JenNet-IP software stack for secure debugging/communication
3. Support up to 500 nodes with powerful network self-healing and readjustment capabilities
4. Meet the "download through the network" ability for future development
5. Support simple and secure debugging of gateways and independent networks in a remote manner
6. (Super) low standby power consumption after turning off the light
7. Multiple control options
8. In addition, ZigBee-based lighting standards are also supported.
9. First-class energy efficiency after turning on/off the light
10. Low BOM cost (IC, external components, PCB)
11. A full range of NXP products such as lighting drivers, AC/DC converters, high-performance IEEE 802.15.4 single-chip transceivers and MCUs ensure solution flexibility
12. Deep dimming capability is compatible with optional triac dimmer
13. A variety of control options:
(1) Battery-powered switch with battery life greater than 10 years and RF remote control, capacitive touch remote control
(2) Dual-boot options for remote control (eg simultaneous operation of RF4CE and JenNet/ZigBee protocols)
(3) PCs, tablets, smartphones, etc. connected through the gateway
(4) Battery-free power collection switch (in planning)
14.iCFL and reference design range for isolated and non-isolated iSSL
15. Supported software stack and capacity (excluding applications)
(1) JenNet-IP and application specific options (approximately 120 kB)
(2) JenNet standard (about 50 kB)
(3) ZigBee Home Automation (about 120 kB)
(4) ZigBee LightLink (about 128 kB)
(5) ZigBee Green Power (about 10 kB)
2. Remote control of NXP intelligent lighting
Battery-powered remote-controlled wireless communication provides an easy and flexible way to control luminaires in a home environment.
Main features and advantages
1.JN5148 single-chip wireless microcontroller adopts complete remote control scheme
2. Capacitive touch screen algorithm for the lowest cost solution
3.100 nA ultra-low standby power consumption extends battery life
4. Support JenNet-IPTM or ZigBee® Home AutomaTIon / Light Link
3. NXP's wireless control system for intelligent lighting applications
Wireless control system for intelligent lighting applications. All lights are connected to a wireless network and can be controlled via remote controls, wall switches or networked equipment.
Main features and advantages
1. All nodes use IPv6 connection
2. Interconnect up to 250 lamps to provide lighting control throughout the building
3. Ultra-low power wireless device with standby power consumption below 150mW
4. Full reference design for CFL and SSL lamps
Wireless control:
The JenNet-IP network interconnects all lights and switches, providing flexible wireless control of all devices in the room. Each endpoint has an IPv6 address that can be controlled individually or as part of a group. This creates a variety of lighting "scenes," such as scenes when reading or watching TV.
Since each light is connected to the Internet, it can be easily controlled via a networked device such as a smartphone or tablet. Other control devices such as switches or remote controls can be used to provide convenience in everyday life. With fully flexible control, you can save energy by ensuring that only the lamps you really need to achieve the highest brightness.
4.NXP intelligent lighting overall solution
On June 18, 2014, Dalian United Holdings, a leading electronic component distributor dedicated to the Asia-Pacific market, announced that its products are based on NXP's Jennic wireless products, Cortex M series 32-bit MCUs and GreenChip lighting driver ICs. Launched its intelligent lighting solution, which enables each lamp to have its own independent IP address, and can switch and dim the lights through smart phones, mobile internet terminals, smart home control panels, computers and other products. Control of functions such as discoloration.
Graphic - Node Block Diagram:
Figure - NXP Smart LighTIng SoluTIons Platform, One platform for CFL, SSL & HF-TL
The JN5148, represented by the Grand Alliance Group, is the latest third-generation ultra-low-power, low-cost wireless microcontroller from NXP Jennic, targeting IEEE802.15.4 and ZigBee PRO applications. The JN5148 integrates a 32-bit RISC processor. The 4-32Mhz clock can be adjusted according to the application software. It includes a 2.4GHz IEEE802.15.4-compliant transceiver, 128KB ROM, 128KB RAM, and UART, SPI, IIC, DIO, Rich digital and analog peripheral interfaces such as ADC and DAC. Up to 128KB of RAM allows customers to run the Zigbee PRO protocol stack as well as customer applications. With operating currents as low as 18mA, a coin cell battery is fully capable of meeting application needs. In addition, the JN5148 adds many other features to the second generation JN5139.
Transceiver features:
2.4GHz IEEE802.15.4 compatible
500 and 667 kbps data transmission mode
Deep sleep: 0.1uA
Sleep with timer: 1.1uA
RX current: 18mA
TX current: 15mA
Receiver sensitivity: -95dBm
Transmitting power: 2.5dBm
Time of flight measurement mechanism
MAC acceleration, CRCs, address check, auto answer, timer
Power supply: 2.0-3.6V DC
Graphic - JN516x Evaluation Kit
Designed for use with the NXP JN5161, JN5164 or JN5168 wireless microcontrollers, the JN516x evaluation kit provides all the components needed for system development, including a range of wireless carrier boards, plug-in expansion boards, USB connectors, and a remote control. An Internet router that is specifically programmed to run enhanced OpenWRT firmware and a complete software design suite. This comprehensive development kit makes it easy to design IoT solutions using ZigBee, JenNet-IP or RF4CE.
Gun safe
Gun safes are secure and protective storage containers for one or more firearms, and/or ammunition for the respective firearms.
Details:
Safes are entirely made of steel;
Made by superior fire-proof materials and special sealing materials;
Shelves are removable and adjustable;
Door bolts are in a 4 way coverage;
All gun safes passed CE certification.
Gun Safety,Fire Proof Gun Safe,Furniture Fireproof Safe ,Fireproof Rifle Safe
YONGFA INTELLIGENT TECHNOLOGY SECURITY CO., LTD. , http://www.yongfa-safe.com