Although we are basically using smart TVs, we can still feel that it is not very easy to use at most times, which is largely caused by operating systems. The system is equivalent to the "brain" of a smart TV, directly affecting the control experience. Even though all kinds of UIs are based on the Android system, they are widely used. How to switch the signal source Since TVs are often connected to other devices, the first thing to turn on the TV may be to switch the signal source. It is necessary to see whether this process is convenient. Remote controller with source switch button Some remote controllers directly provide a signal switching button, which is convenient to operate. However, remote controllers are now pursuing simplicity. There are not many remote controllers with physical signal source switching keys. Home to complete signal source switching From the system level, the fewer steps the signal source switches, the better. Take the cool open system of Skyworth TV as an example. The home page directly provides the entrance of “HDMI1â€. This small icon is a system level, and cannot be customized. The input source can be switched quickly. What if it is a non-HDMI1 signal? Press the left arrow of the remote control to continue selecting other sources and it does not take much trouble. How to open a local file In addition, we often need to access the hard disk or U disk to see some downloaded movies, TV shows and other content, but some televisions do not prompt after the external storage device, or need to open the "local media" in the "my application" It is time-consuming and laborious to open them. Insert hard disk TV automatically pop-up tips Or Skyworth TV's cool open system, after inserting the hard disk, the TV will automatically pop up tips, and also from the picture just changed the source can be seen by pressing the left direction of the remote control can directly appear "local media" entrance, but also with the remote control Directly click the U disk symbol in the upper right corner to enter the external device. Is it convenient to open third-party software? Smart TVs are inevitably equipped with a lot of third-party applications, and some are used at a high frequency. If you need to open them in “My Applicationsâ€, it will be very troublesome. Especially if you install a lot of software, you may want to set some shortcuts for them. . Home can directly open third-party applications Skyworth TV's cool open system home page In addition to open the "My Apps", press the down arrow of the remote control to see the small icons that support customization, you can put the commonly used third-party software here, after you turn on the TV just need a few simple Steps can be opened for use. Is there a voice search function? The most troublesome operation on TV is search. It is inconvenient to use the remote control to select letters, whether it is a nine-square grid or a full keyboard. It is therefore best to provide voice search. Cool open wizard voice search and precise control The voice method is not only convenient for searching movies, but also can replace many operations that use the remote control, such as fast forward and rewind. Of course, more than that, Cool Open System 5.8 provides cool open wizard functions, which not only can quickly identify, but also is very intelligent. High, and even control some third-party software. Therefore, apart from considering some “hard†strengths such as picture quality performance, hardware configuration, and appearance design when buying a TV, the system must be taken into account when it is easy to use. Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.
