LED lighting standards have always been a hot topic in the industry. According to the statistics of relevant departments, the National LED Lighting Standardization Technical Committee has standardized 11 LED national standards and 2 industry standards. 6 national LED standards and 2 industry standards are being formulated; LED-related countries are involved. There are 25 standards and 1 industry standard. But how to make these standards play their due role requires further efforts by the industry.
Let LED national standards "advance with the times"
I have to admit that China's LED industry is still in the primary development stage, about 80% of products are concentrated in the application market of landscape lighting, traffic lights, etc., and the general lighting market is still being promoted. As of the end of 2011, there were more than 3,000 LED companies in China, of which only 140 were in the annual output value of over 100 million yuan. However, none of the 140 companies have annual sales of more than 1 billion yuan, and only a few of them have more than 500 million yuan. It can be seen that the scale and standardization of China's LED industry is still elusive.
The consequence of the low threshold is that the enterprises are not well-balanced, and the disorderly development will inevitably lead to chaos in the industry. The non-standardization of industrial development is objectively caused by disorderly competition in the market, but at the same time, it requires the “invisible hand†of national macro-control to support and guide, because the advancement of the LED industry has affected the employment of traditional lighting industry too quickly. Local policy conflicts, industry standards, testing, and certification mechanisms are "fighting" each other. National standards, industry standards, local standards, and corporate standards are not uniform, and even local protectionism, etc., it is unrealistic for enterprises to "mediate" from them.
In fact, if the LED industry wants to achieve large-scale promotion and healthy development, it must first establish a set of standards in line with national conditions, including national standards, technical standards, testing standards, certification standards, etc., "no rules are not square" is This is the truth. Due to the lack of national standards recognized by the industry in the LED industry, the detection system has not yet been established, which not only causes the mixed enterprises in the LED industry, but also leads to the uneven quality of LED products, the emergence of many unfair competition phenomena such as false advertising, and the current The disorderly competition in the LED industry has intensified. Some enterprises reported that the parameters detected by the two test equipment were inconsistent because the two test equipments were not used as a standard. The result of the non-uniformity of the standards was that the quality and performance of the products were different.
The development of China's LED industry must rely on the guidance of national standards such as product standards and energy efficiency standards. The introduction and implementation of national standards and testing systems not only contributes to the improvement of LED product quality and service life, but also contributes to the expansion of market share of LED companies with heavy quality and heavy brand, and is more conducive to LEDs with technical strength and channel strength. Enterprises are bigger and stronger and the technology upgrade of the LED industry.
Verification of standard units optimistic about LED lighting
The international verification standard unit UL is optimistic about the wide application of LED lighting. UL Asia Development Manager Chen Lizhen pointed out on December 11 that Taiwan's LED factory technology is good, and the special lighting with high security threshold will be the new blue ocean of Taiwan LED factory.
It is reported that Taiwan's LED packaging factory that has been certified for special lighting experiments has Edison and Qi Wei, who have invested in Jingdian. LEDs enter the lighting era from backlights. The competition facts of oversupply and falling prices have made many LED factories profitable. However, Chen Lizhen said that LED lighting applications are not only ordinary people's livelihood lighting, but also the characteristics of LEDs used in lighting. However, how to profit from the in-depth operation, the choice of the market is the key.
Judging from the technical advantages of Taiwan's LED factory, Chen Lizhen believes that it is a good choice to earn a certain profit from the special lighting with high security threshold, but also because the safety threshold is high, the product testing time is at least 6,000 hours waiting. In the meantime, this first threshold has caused many business owners to retreat. He believes that as long as the business owner insists on choosing a long-term stable profit-making model, special lighting will be a good choice for Taiwan LED factory.
UL believes that the most distinctive feature of special lighting applications is that the use environment is usually in the public domain, and the lighting time is long, and its safety verification standards are high. Terminal applications include emergency lighting, stage lights, underwater lights, track lights, LED transposable sets, The path indicates lighting, swimming pools, surface temperature limits, medical venue lighting, and the like. At present, LED lighting products with internationally validated standards for medical field lighting include surgical lighting, xanthium lamps, infrared heating lamps, beauty lighting, and lasers.
(This article is reproduced on the Internet. The texts and opinions expressed in this article have not been confirmed by this site, nor do they represent the position of Gaogong LED. Readers need to verify the relevant content by themselves.)
Let LED national standards "advance with the times"
I have to admit that China's LED industry is still in the primary development stage, about 80% of products are concentrated in the application market of landscape lighting, traffic lights, etc., and the general lighting market is still being promoted. As of the end of 2011, there were more than 3,000 LED companies in China, of which only 140 were in the annual output value of over 100 million yuan. However, none of the 140 companies have annual sales of more than 1 billion yuan, and only a few of them have more than 500 million yuan. It can be seen that the scale and standardization of China's LED industry is still elusive.
The consequence of the low threshold is that the enterprises are not well-balanced, and the disorderly development will inevitably lead to chaos in the industry. The non-standardization of industrial development is objectively caused by disorderly competition in the market, but at the same time, it requires the “invisible hand†of national macro-control to support and guide, because the advancement of the LED industry has affected the employment of traditional lighting industry too quickly. Local policy conflicts, industry standards, testing, and certification mechanisms are "fighting" each other. National standards, industry standards, local standards, and corporate standards are not uniform, and even local protectionism, etc., it is unrealistic for enterprises to "mediate" from them.
In fact, if the LED industry wants to achieve large-scale promotion and healthy development, it must first establish a set of standards in line with national conditions, including national standards, technical standards, testing standards, certification standards, etc., "no rules are not square" is This is the truth. Due to the lack of national standards recognized by the industry in the LED industry, the detection system has not yet been established, which not only causes the mixed enterprises in the LED industry, but also leads to the uneven quality of LED products, the emergence of many unfair competition phenomena such as false advertising, and the current The disorderly competition in the LED industry has intensified. Some enterprises reported that the parameters detected by the two test equipment were inconsistent because the two test equipments were not used as a standard. The result of the non-uniformity of the standards was that the quality and performance of the products were different.
The development of China's LED industry must rely on the guidance of national standards such as product standards and energy efficiency standards. The introduction and implementation of national standards and testing systems not only contributes to the improvement of LED product quality and service life, but also contributes to the expansion of market share of LED companies with heavy quality and heavy brand, and is more conducive to LEDs with technical strength and channel strength. Enterprises are bigger and stronger and the technology upgrade of the LED industry.
Verification of standard units optimistic about LED lighting
The international verification standard unit UL is optimistic about the wide application of LED lighting. UL Asia Development Manager Chen Lizhen pointed out on December 11 that Taiwan's LED factory technology is good, and the special lighting with high security threshold will be the new blue ocean of Taiwan LED factory.
It is reported that Taiwan's LED packaging factory that has been certified for special lighting experiments has Edison and Qi Wei, who have invested in Jingdian. LEDs enter the lighting era from backlights. The competition facts of oversupply and falling prices have made many LED factories profitable. However, Chen Lizhen said that LED lighting applications are not only ordinary people's livelihood lighting, but also the characteristics of LEDs used in lighting. However, how to profit from the in-depth operation, the choice of the market is the key.
Judging from the technical advantages of Taiwan's LED factory, Chen Lizhen believes that it is a good choice to earn a certain profit from the special lighting with high security threshold, but also because the safety threshold is high, the product testing time is at least 6,000 hours waiting. In the meantime, this first threshold has caused many business owners to retreat. He believes that as long as the business owner insists on choosing a long-term stable profit-making model, special lighting will be a good choice for Taiwan LED factory.
UL believes that the most distinctive feature of special lighting applications is that the use environment is usually in the public domain, and the lighting time is long, and its safety verification standards are high. Terminal applications include emergency lighting, stage lights, underwater lights, track lights, LED transposable sets, The path indicates lighting, swimming pools, surface temperature limits, medical venue lighting, and the like. At present, LED lighting products with internationally validated standards for medical field lighting include surgical lighting, xanthium lamps, infrared heating lamps, beauty lighting, and lasers.
(This article is reproduced on the Internet. The texts and opinions expressed in this article have not been confirmed by this site, nor do they represent the position of Gaogong LED. Readers need to verify the relevant content by themselves.)
Litz Wire Typical applications are: high frequency inductor, transformer, frequency converter, fuel cell, the horse, communication and IT equipment, ultrasound equipment, sonar equipment, televisions, radios, induction heating, etc.In 1911, New England became the first commercial manufacturer in the United States to produce the Leeds line.Since then, New England has remained the world leader in providing high-performance Leeds line products and solutions to customers around the world.It is also transliterated as the "litz line".
Litz Wire
Litz Wire,Copper Litz Wire,Copper Transformer Litz Wire,High Temperature Litz Wire
YANGZHOU POSITIONING TECH CO., LTD , https://www.yzpstcc.com