Modern urban life is busy and tense, and a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? With a little skill, you can easily create a pleasant home. Life Home Xiaobian has prepared a series of fashion information from house decoration to home decoration to help you have a relaxed and comfortable life.
To choose a lighting with higher safety performance, pay attention to the following aspects.
1. Marking on the product: See if the manufacturer's name and trademark, model, rated voltage, rated power, etc. are safe;
2. Protection against electric shock. The electric shock caused by the luminaire is generally caused by the use of a lamp holder or luminaire that does not meet the requirements, and the protection of the live parts without a cover. Normally, the bulb is screwed in during use, and the person should not touch the live parts after the lamp is energized.
3. Cross-sectional area of ​​the wire used in the luminaire: When purchasing, you can look at the mark printed on the insulation layer outside the wire on the luminaire. The minimum cross-sectional area of ​​the wire used on the luminaire is specified to be 0.5 mm/square. Some of the defective products have a cross-sectional area of ​​only 0.2 mm/square. When such a wire is in an abnormal state, the wire is burnt, and the insulation layer is burned out and short-circuited, posing a danger.
4. Structure of the luminaire:
(1) There should be no sharp edges at the entrance and exit of the metal pipe through which the wire passes, so as to avoid cutting the wire and causing the metal parts to be charged, posing a risk of electric shock.
(2) Lamps such as table lamps and floor lamps should have wire holders at the entrance of the power cord to prevent the wires from coming off when the wires are pulled, causing the metal casing to be charged and causing electric shock. In addition, the wire holder can also be used. Prevent the heating element from coming into contact with the heating element, causing the wire to overheat and causing the insulation layer to melt. The exposed wire is in contact with the metal case, and the case is charged, resulting in electric shock.
Editor: China Lighting Network Feng Yaoyuan
G9 LED Lighting, G9 AC LED, Ceramic G9 LED Lamp, with Epistar AC LED no LED driving. With the September 1, 2013 European new ERP requirements, the whole light weight < 12g. Energy saving and environmental protection, high brightness, low energy consumption, good uniformity of color temperature, color constancy, lumen maintenance rate is high, long service life.
G9 LED Lights, G9 Lights, LED Lighting G9, LED G9 Lamp, Lamp G9, G9 Lamps, Led G9 Lamps
Ningbo YiMing Lighting Technology Co., Ltd. , http://www.yimingtech.com