Luminus Devices continues its product positioning for larger and brighter LEDs, exhibiting SBT-90 PhlatLight LEDs for entertainment, display, medical and automotive applications. The special feature of this LED is that it does not require a secondary optical design (such as a semi-circular lens). Luminus uses this package to allow light to exit directly. According to Chuck DeMilo, the company's global product marketing director, the SBT-90 contains a single 9mm 2 chip, so the brightness of the light cannot be compared to the traditional 1W LED array. The LED has a luminous flux of 1800 lm, a standard color temperature of 6500 K, and a CRI of 70. In addition, Luminus also showcased the lamps offered by many other partners. One of the Almeco Vega street lights is worthy of attention, using a single Luminus CSM-360 PhlatLight LED.
Copper-based PCB, it's the PCB that use copper as the base material and very commonly used in LED products and other electronics products since copper is the material have high heat dissipation.
PCB = printed circuit board and PCBA = printed circuit board assembly. For PCB, it means the copper circuits be printed on a board, and so the main composition of PCB are copper and board.
The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.
The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.
We are the one-stop shop for all kinds of PCB manufacture service from PCB Prototype to big volume, which could save our customers a lot of time and money.
PCB Manufacture Capabilities
|
Features |
Capabilities |
|
Layers |
1-36 layers |
|
Material |
FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc. |
|
PCB Type |
FR-4 Standard PCB , Aluminum PCB , Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc. |
|
Board Thickness |
0.1mm-6.0mm |
|
Copper Thickness |
1/2oz-6oz(18um-210um) |
|
Biggest Board size |
600mm*1200mm |
|
Min Tracing/Spacing |
0.075mm/0.075mm (3mil/3mil) |
|
Min drilling Hole diameter |
0.15mm(6mil), 0.1mm(4mil)-laser drill |
|
Solder Mask |
Green, Black, White, Red, Yellow, Blue and Purple, etc. |
|
Silkscreen color |
White, Blue, Black, Red, Yellow |
|
Surface finish |
HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc. |
|
Special Techniques |
Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc. |
PCB Products Show
PCB Factory Show
Copper-based PCB
Copper-based PCB,Heavy Copper PCB,Copper Core PCB,Extreme Copper PCB
ZhongFeng Electronic Technology Co., Limited , http://www.dopcba.com