Mu Linsen ate six companies to raise IPO applications on the 27th meeting

[High-tech LED News] Mulinsen shares are planned to be listed on the Shenzhen Stock Exchange. The IPO application will be reviewed on July 27. Mulinsen intends to issue 4,835,500 shares, accounting for 25.06% of the total issued share capital.

According to the prospectus issued by Mu Linsen, the company acquired the equity of six related companies such as Ji'an Mulinsen, Greenman, Dibo, Willisen, Angusson and Saiwei Vision before Shaoguan, making it a holding company. The company, in order to eliminate peer competition, reduce related transactions, clear the obstacles for Shaoguan.

Among the above six companies, except for the 55% equity of Ji'an Mulinsen, the equity transfer was completed on March 24, 2008, and the other five completed the acquisition in May and June 2010.

According to the prospectus, the size of the six companies is small, so the impact of the acquisition on Mulinsen shares is not large. Ji'an Mulinsen's profit in 2007 accounted for 0.59% of the company's total profit. The total profits of Grenman, Dibo, Willisen, Angusson and Saiwei Vision in 2009 only accounted for 1.55% of the company's total profit.

It is reported that Greenman is mainly engaged in LED lighting, Dibo is mainly engaged in LED energy-saving lamps, Angerson, Willisen and Saiwei Vision are mainly engaged in LED products at home and abroad. Prior to the acquisition, the export of some of Mulinsen's products was sold outside of Willisen. At the same time, Mulinsen provided raw materials for the downstream applications of Grenman and Dibo. Ji'an Mulinsen was the commissioned processing base for some of Mulinsen's products. There are many related transactions between Mulinsen and the above-mentioned companies, which may cause obstacles to listing.

LED Driver is an essential part to DC12V and DC24V Led Modules and led strips. They are with IP classification IP20 and IP67 to satisfy indoor and outdoor use.

LBY could provide different drivers to meet your needs, they are high transfer efficiency, stable constant voltage output,both indoor & outdoor use suitable, 100% full loading, 100% burn-in tested,overload/short circuit protection. 

LBY12150FLLBY12030FL

How to connect single color LED strips with led drivers?

led strip with diver

RGBW strips with led drivers?

RGBW strip with driver

Installation Tips:

Please identify the power supply`s input and output before installation.

Ensure correct output + & - wire connection. Power on after wire connection is done.

To avoid voltage drop and loading capacity wasting on the output extension wire, please install the power supply to the loading as near as possible, if must use long extension wires, thicker wires and less loading wattage is required.

The power supply to be installed at good ventilation and cooling environment.


Led Driver

Led Driver,Dimmable Led Driver,Rgb Led Driver,Power Led Driver

SHENZHEN LINGBENYANG IND. CO., LTD. ,