Effect opening and closing operations
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
Effect opening and closing operations
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
Effect opening and closing operations
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
Effect opening and closing operations
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
Effect opening and closing operations
Fantom-XR's built-in effects can be turned on and off as a whole. You can turn these settings off if you want to hear unprocessed results from the sounds you created, or if you want to use external effects instead of built-in effects.
Tip :
These MFX, CHO, and REV on/off settings are temporary; they are not saved at the same time as the patch, performance, or system settings. (These switches will be turned on when the Fantom-XR power is turned on).
prompt:
The MST (Mastering) on/off setting is saved as a system setting. This can be used to determine the effect of the effect on the overall Fantom-XR, such as some compression of the mid-range to make it more permeable.
1. Press [FX].
The effect switch (switch) is displayed.
2. Turn the parameter wheel (VALUE) or press to select the effect switch.
3. Press the parameter wheel or use [INC][DEC] to turn the effect on/off. Press once to turn the effect on/off once.
LED Track Light,LED Track Lighting,LED Lighting
LED Track Light,SMD LED Strip,LED Downlight Co., Ltd. , http://www.cnledstrip.com