A few days ago, the author learned from the relevant departments of the Suifenhe Port in Xinjiang that the exports of lamps and lanterns in the exports of the Suifenhe Port showed a good export situation.
It is understood that since the second half of 2008, due to the impact of the international financial crisis in Russia, the market circulation has experienced a rapid slowdown, which has led to a significant decline in many Chinese exports to Russia. Under this background, the export of lamps and lanterns at Suifenhe Port has shown a benign development momentum against the trend. In the first month of 2009, the export of lamps and lanterns at the port of Hong Kong continued its trend last year, and the export growth rate was huge. From the figures, the export value of such goods reached US$12,927,159 in January this year, an increase of 434% over the same period.
According to the person in charge of a foreign trade enterprise, the main reason for the high growth in the export of lamps and lighting equipment in the past two years was caused by the rapid growth in demand for such products by the Russian decoration industry. From the current point of view, the number of lamps used by Russians to decorate their rooms has increased the fastest, and the number of lighting fixtures required for some public facilities has increased significantly. Therefore, these products have maintained a selling trend in the Russian market. The lamps and lanterns exported by Suifenhe Foreign Trade Enterprises to Russia are mainly dominated by large and medium-sized cities such as St. Petersburg, Moscow and Yekaterinburg. In the export of lamps, the export volume of high and mid-range lamps accounts for about 70% of the total exports.
More people
[ details]
1
Single Side Board, FR4 TG135 Material. copper thickness 1oz finished. LF-HASL surface treatment with green solder mask. board thickness 0.6+/-0.1mm. Min.line width/Min.line spacing 0.15/0.15mm. E-test: 100% 30up with routed&v-cut. No x-out allowed.
Single Side Board, FR4 TG135 Material. copper thickness 1oz finished. LF-HASL surface treatment with green solder mask. board thickness 0.6+/-0.1mm. Min.line width/Min.line spacing 0.15/0.15mm. E-test: 100% 30up with routed&v-cut. No x-out allowed.
The single side boards are generally simple, so the production process is simplified and the cost is low.
A lot of PCB boards are made as FR4, and some of the low-end products are made as CEM-1
Single Side Board
Single Side Board,Single Sided PCB,Single Sided PCB Board,Single Layer PCB
Orilind Limited Company , http://www.orilind.com