If you like extreme sports such as extreme speed skiing, you can feel the sound of the wind while listening to the snowy snow-capped mountains. However, you don’t like a lot of teaching and training, and every time you “streetâ€, the faceç ¸ feeling in the snow. Then "Fancy Skiing" is your best choice. HashVR is a VR game development studio in China. In order to get support from the game community on the platform, they have already released their own VR works in Steam's popular light community.
Fancy Skiing Ski Games
"Fancy Skiing" currently only supports HTC Vive, you need to use Vive handle avatar's pole to push yourself forward in the snow.
"Fancy Skiing" wins with speed, and the consistent goal is to get as fast as possible. However, there is no obstacle in the process of skiing. So there are also roadblocks in the game, such as trees, boulders, canyons, and even roadside deers. To avoid these obstacles, you only need to tilt your body to the left or right.
The best experience of this game is to stand up and play, with more immersive reality. However, studio staff suggested that because of the speed, it is best to remain seated to avoid discomfort. Just like all other products on the popular light of Steam, Harvey Studios also needs a certain number of votes in order to be successful on the Steam platform, and subsequent development and full release.
HDMI, known as High Definition Multimedia Interface, is mainly used for transmitting HD audio and video signals.
There are three types of data transmitted by HDMI TMDS (plus Hsync and Vsync count as four) :
1.Preamble (control information) is mainly used to control the Data to be transmitted next, namely Data Island or Video Data
2.Data Island, all kinds of packet information, including audio packet, image packet, etc
3.Video Data, Video pixel Data. HDMI can transmit pixel Data in RGB and YUV formats
4. And Hsync and Vsync
HDMI Source device (HDMI HPD) will monitor the Hotplug port of the sink device. If the Hotplug is High, it will prove that the device can work, and then read DCC; if it is low, it will prove that the device is disconnected.
The HDMI Sink device should notify the source device that EDID has been changed by pulling the Hotplug down, and the source device will read the new EDID again after the Hotplug is pulled up, which should be more than 100ms.
HDMI provides that the EDID can be read by DCC when the 5V pin of HDMI is powered on, that is, the Hotplug needs to be high, and some Hotplug is directly connected to the 5V
TMDS Clock is the Pixel Clock, the Clock frequency used for a Pixel point. Through TMDS Clock CLK pins transmitted to the receiver, but the receiver is not clear for what TMDS Clock frequency of the sender sent, so you need to through the Phy (Phy is analog to digital conversion section, is different from the ADC, Phy is don't know the sampling frequency, the need to lock frequency and phase lock, detect the exact input frequency) to lock.
Pc Hdmi Input,Hdmi Input Adapter,Hdmi Input Splitter,Hdmi Port On Tv
Tonya Display Limited , https://www.tydisplay.com