About è´±Donkey:
JamesDonkey, Bessie Mahu, was born on February 14, 2014. Lively humor, longing for a free and happy life; innocent and insignificant, good at bragging without capital; good enthusiasm, loyal to their friends; character is strong and unyielding, adhere to their own ideas and practices; use actions to pursue dreams, dare to think. Is a confident, stubborn, dreaming little person. JamesDonkey brings a unique youthful fashion feel to the user with its original, attractive design and lively colors.
Foreword:
First of all, thanks to the test opportunities offered by Zhang Aunt. It has always been Aunt Zhang's heavy use of patients and her numerous hands. The first time I was eligibility for testing, I was very excited. After a long wait after confirming participation, I finally waited for the familiar value.
Packing & Unpacking:
Rolling 619 mechanical keyboard product packaging continues the simple style of the past ass, the upper right corner of the keyboard model and humorous "donkey roll" named. The quality of this keyboard wrapper is quite good and very hard. The seal can be seen as the Donkey 619 roll mechanical keyboard 104 key black yellow black shaft.
Unpacking, I was surprised to find that this is the back of the donkey. ? This made me curious about his true face.
It turned out that this is his real face. .
Rolling 619 mechanical keyboard In addition to the necessary product manuals for the accessories, the key puller that may be used at ordinary times is also presented. It also includes a separate black nylon braided wire, indicating that this keyboard is a key-line split design.
Rolling instructions and warranty cards for the 619 mechanical keyboard are combined.
Appearance & Details:
Rolling 619 mechanical keyboard for the key line separation design, this design allows you to carry out more convenient. The top cover of this keyboard is made of aluminum alloy and uses one-piece stretch forging, which makes people feel that this keyboard has a sense of fortitude.
Rolling 619 The design of the back of the mechanical keyboard is very innovative. The keyboard is designed with supporting feet and non-slip feet attached to the flanks on both sides, especially with a touch of yellow belonging to a donkey.
Rolling 619 There are only two non-slip feet on the back of the mechanical keyboard, one on each side. And there are no non-slip feet on the support feet, but after testing, the overall anti-slip performance of the keyboard is still relatively good, normal use is certainly no problem. The supporting feet were fixed on the keyboard by screws, and all the keys on the keyboard were Allen screws, which made me wish to open and see the internal work.
The keyboard interface of the Rolling 619 mechanical keyboard adopts a microUsb connector and has a fixed slot, so there is no need to worry about the looseness of the interface.
Rolling 619 The top cover of the mechanical keyboard is a metal frosted panel. The texture is very strong, and the design of the indicator light is also very innovative.
The design of the donkey mechanical keyboard side wing is a heritage of the donkey brand, although the design of the roll 619 mechanical keyboard wing looks more innovative than the previous keyboard, and the integrated sports car elements are also more abundant, but compared to the A full metal side of the keyboard, this keyboard plastic material does have a strong side of the keyboard looks like a strong plastic, which for the metal material control player, how many will regret it. The height of the keycaps is based on the height of our usual OEMs, which is higher than the original height. Suspension axis + borderless design + metal panels can be considered domestic brands have always been routine.
Key Cap & Shaft:
Rolling 619 mechanical keyboard keycap using ABS material, two-color injection molding process, so that the characters and the keycap will be more integrated, to maintain the consistency of the feel, and the characters will not easily fall off. The scrub process on the keycap is still very obvious, and the hand feel is more delicate. It can be seen from the picture that the light transmittance of the keycap character is relatively general, but the thickness of the inner wall of the keycap is still good, and it is also very clean.
Rolling 619 mechanical keyboard using Jia Da Long black shaft, the key feel and cherry black shaft is not much difference, has a straight up and down the handle, the initial pressure is slightly larger than the cherry black shaft. The large key position adopts the design of the satellite axis, and the disassembly is still very convenient, and the handle adjustment is fairly good.
However, this is what, who can help me explain, the following graphic explanations are very clear and clear, but the corresponding direction, this is what happened?
drive:
Rolling 619 mechanical keyboard uses a cloud drive.
Rolling 619 mechanical keyboard drive interface is very fresh and simple.
This cloud drive can make light adjustments to this keyboard, such as lighting effects, breathing speed, and light brightness.
light:
Rolling Back 619 mechanical keyboard backlight is a yellow monochrome backlight (the ass's life-threatening - show yellow), transparent shaft cover greatly enhances the uniformity of the overall backlight and brightness, a variety of lighting effect adjustment also makes this keyboard is a single But not monotonous (single light, helium mode, wave mode, custom backlight, breathing light mode, etc.).
The F area of ​​the roll 619 mechanical keyboard can also be used as a preset function keypad.
test:
After testing, the roll 619 mechanical keyboard has no punch settings for full keys, so whether it is office or playing games is a good choice.
For this keyboard, I still like it very much. In the game, the quick key reaction of the black axis is really helpful for the game, especially the League of Legends, which requires a quick press of the skill game. Whoever competes is faster. However, the disadvantage of the black shaft is that it feels tired when used for a long time. Therefore, small partners must pay more attention.
to sum up:
advantage:
+ The likeness of the sports car flanking design is very new
+ Monochrome light
+ Very good value for money, an East price of 259 yuan
insufficient:
-Side plastic material does look cheap
- Mistakes in the direction of the keypad
- The keyboard should be face up, but this is my face up
Pipe Fitting mainly used for pipes' connection which widely applied to petroleum and gas pipeline, chemical, power plant, and shipbuilding industries. The products include elbow, tee, reducer and cap
Butt Welded Pipe Fitting
Material: Carbon Steel & Alloy Steel&Aluminum Steel
Standard: ASME Standard, ASTM Standard, JIS Standard, DIN Standard, EN Standard, MSS Standard, NACE Standard
Wall Thickness: ASTM Standard: SCH5s, SCH10s, SCH20, SCH30, SCH40, SCH60,SCH80, SCH100, SCH120, SCH140,SCH160, STD, XS, XXS;
JIS & DIN Standard
Seamless Pipe Fitting Size
1/2"-24"
Welded Pipe Fitting Size
26"-100"
Butt Welded Pipe Fitting,Welded Pipe Fitting,Seamless Pipe Fitting
MATERIAL
Carbon Steel :
ASTM A234 WPB; 20#, 10#
DIN St37, St45.8, St52.4,St.35.8,St.35.8.
Stainless Steel:
304 304L 316 316L
Alloy Steel:
16Mn St45.8 A420 WPL6, A234 WP5, WP9, WP91, WP92, WP11, WP22, etc
ASTM A860 WPHY42, WPHY46,WPHY52,WPHY60,WPHY65,WPHY70
STANDARD
ASTM / JIS / DIN / BS / GB / GOST
MODEL
1.Tee(Straight and Reducing) 2.180 DEG Return
3.Elbow (45/90/180 Degree) 4.Cap
5. Reducer(Concentric and Eccentric)
TYPE
Seam Or Seamless
SURFACE
Black Paint, Anti Rust Oil, Hot-Dipped Galvanize
WALL THICKNESS
SCH5S, SCH10, SCH20, SCH30, SCH40, STD,XS,SCH60,
SCH80, SCH100, SCH120, SCH140, SCH160, XXS,
SIZE
1/2"-100"
CONNECTION
Welding
SHAPE
Equal, Reducing
APPLICATION
Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
Customers' drawings or designs are available.
PACKAGE
1> 1/2" - 2" in cartons.
2>Above 2" in wooden cases.
Big size is workable by pallets.
DELIVERY DETAILS
According to the quantities and specifications of each order.
Normal delivery time is from 30 to 45 days after receiving the deposit.
Pipe Fitting,Seamless Pipe Fitting,Butt Welded Pipe Fitting,Welded Pipe Fitting
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com