The bright prospects of the LED lighting industry have made people full of confidence in the LED lighting market. Under the energy shortage in the 21st century, the national government has strongly supported the promotion of energy conservation and environmental protection policies. Many enterprises have continuously increased their investment and support in the LED lighting market.
With the rapid development of LED lighting, it has been widely used in outdoor lighting such as road lighting and landscape lighting. Up to now, the development and application of LED lighting has rhythmically promoted indoor lighting, namely ordinary household lighting, commercial lighting, etc. Such a huge potential for lighting applications.
LED lighting fixtures status and design trends
At present, the application of LED lamps to the field of civil lighting is getting deeper and deeper. Although the LED lighting in the market is mainly street lamps and commercial lighting, the LED panel lamps with flat dimming and color grading functions and the flat LED lamps are frequently used. Attract people's attention. The price of LEDs is still a hurdle. As the most important factor hindering the promotion of LEDs, the high price keeps this kind of new energy-saving and environmentally friendly lamps out of the civilian market. According to industry insiders, LDE lighting fixtures use sapphire as the chip substrate, and they have to use gold for conductivity. There are enough reasons to become "noble lamps".
The penetration rate in the LED lighting market is expected to reach 16.8% in 2015. The report also mentioned that under the stimulus of government policies, the penetration rate of household lighting and street lamps in LED applications will be greatly enhanced, such as the 12th Five-Year Plan of China and the LED subsidy policy of Taiwan. These subsidies also include commercial lighting. . LED bulbs and LED fluorescent tubes are also growing year by year in the Japanese market. The main reason is that the Japanese government's subsidy policy and awareness of energy conservation have risen since the March 2011 earthquake.
At the same time, many new LED suppliers joined the battle and started production very quickly. Based on the chip size of 500X500 microns, the overall supply grew by 41% in 2011, but the demand grew by only 10%, which led to the oversupply in 2011.
the life time and reliability of the end product will decrease.
Visit bergquist to get more information about high thermal.
PTTC (Polytronics) is another top quality but much cheaper than Bergquist in the word ,it is made in TaiWan .visit PTTC.
With the rapid development of LED lighting, it has been widely used in outdoor lighting such as road lighting and landscape lighting. Up to now, the development and application of LED lighting has rhythmically promoted indoor lighting, namely ordinary household lighting, commercial lighting, etc. Such a huge potential for lighting applications.
LED lighting fixtures status and design trends
At present, the application of LED lamps to the field of civil lighting is getting deeper and deeper. Although the LED lighting in the market is mainly street lamps and commercial lighting, the LED panel lamps with flat dimming and color grading functions and the flat LED lamps are frequently used. Attract people's attention. The price of LEDs is still a hurdle. As the most important factor hindering the promotion of LEDs, the high price keeps this kind of new energy-saving and environmentally friendly lamps out of the civilian market. According to industry insiders, LDE lighting fixtures use sapphire as the chip substrate, and they have to use gold for conductivity. There are enough reasons to become "noble lamps".
The penetration rate in the LED lighting market is expected to reach 16.8% in 2015. The report also mentioned that under the stimulus of government policies, the penetration rate of household lighting and street lamps in LED applications will be greatly enhanced, such as the 12th Five-Year Plan of China and the LED subsidy policy of Taiwan. These subsidies also include commercial lighting. . LED bulbs and LED fluorescent tubes are also growing year by year in the Japanese market. The main reason is that the Japanese government's subsidy policy and awareness of energy conservation have risen since the March 2011 earthquake.
At the same time, many new LED suppliers joined the battle and started production very quickly. Based on the chip size of 500X500 microns, the overall supply grew by 41% in 2011, but the demand grew by only 10%, which led to the oversupply in 2011.
MC PCB--Metal Core Printed Circuit Boards
MC PCB means metal core printed circuit boards. why use metal,not FR4/CEM-1 or others? All is to get high thermal conductivity. The most MC PCB is Aluminum PCB, Aluminum has good heat transfer and dissipation ability, but also cheaper than copper based PCB.Many customers asked a quote for MC PCB but without the thermal requirements.If you know the thermal conductivity is the most most important thing for MC PCB,then
you will know why the price is so difference. Normal thermal is from 0.8-2.00 W/m.k,and higher can up to 8.0 W/m.k,even more if you need ,but ,are you sure ? When we quote to you ,we have to ask you the thermal conductivity,it is not only about cost but your product.Many factories used low thermal ,can you use the boards?
MC PCB uses in LED lights,Industrial power equipment,Cars,Power,etc. Bergquist is the top quality metal core material but top cost as well.
Thermal Conductive Board (TCB), or Insulated Metal Substrate (IMS), provides the advantages of high thermal conductivity, reliability and solder heat endurance. The TCB substrate is a sandwich structure, which includes layers of conductor, insulator and metal base.Traditionally, this insulator is made of epoxy, epoxy filled glass fiber, polyimide, or other dielectric materials. However, these kinds of insulators could not meet the requirement in high-power electronic devices. The heat generated by these devices will accumulate, andthe life time and reliability of the end product will decrease.
Visit bergquist to get more information about high thermal.
PTTC (Polytronics) is another top quality but much cheaper than Bergquist in the word ,it is made in TaiWan .visit PTTC.
MC PCB
MC PCB,MC PCB Board,White Solder PCB,Led Aluminum PCB
Storm Circuit Technology Ltd , https://www.stormpcb.com